Grab Sampler

Fully made of stainless steel, very useful to collect sample of mud, sand, sediment from the pond, lake, and sea etc, supplied with 15 mtr. rope.


Category No Weight (approx.) Capacity (approx.)
RSG -1 5 kgs 2 kgs


 
  Fermentor
Available in two models. Vertical and Horizontal model. Triple walled construction suitable for Bio - fertilizer units to prepare and condition the broths for culture of various micro organisms. Fully made of stainless steel 304 quality sheet, inner jacket made of thick S.S. sheet and the outer insulated with glass wool blanket to minimize the heat loss and covered with S.S. sheet of 304 quality.
Steam generator made of thick guage S.S. sheet and insulated, all the pressure control valves, inlet and outlet valves are made of S.S. provided with safety valves and pressure release valve and a digital temp: controller. Suitable to work on230 V or 415 VAC. All the steam pipe are insulated and cladding provided with S.S. sheet. Water level indicator or water level cut OFF system can be incorporated with the steam generator.
Air compressor Oil less, with special HEPA filters provided at air intake position, Filtered compressed air passed through a moisture trap.
In the Vertical model fermentor a stirrer is provided, and in the Horizontal model a special motor is provided to mix up the broth.
Available in various sizes and capacity, 50 ltr to 250 ltr. Capacity single fermentor is available, for more quantity requirement two or more fermentors can coupled with one steam generator.
Category No Internal Dimension (dia)
RFB-200 200 ltr. Horizontal tank with 6 KW steam generator
RFB-400 200+200ltr.Horizontal tank with 6 KW steam generator
Various models of fermentor is available on request, for rate please contact us with the capacity requirement and specifications.
 
  Plant Growth Chamber
 
This is a versatile unit for conducting quality control tests under controlled conditions of temperature and humidity. Atmospheric – climatic - conditions are created with in the chamber to experiments perform different without going on to the field.
Double walled construction, outer body made of G.I. sheet, duly powder coated, inner chamber made with 304 quality stainless steel sheet. Temperature range 100C to 600C. Accuracy ±10C. Temperature-humidity controlled by digital display temperature controller. Humidity range 50% to 95% RH, accuracy±3%. Temp and humidity are controlled by digital display temp: controller and Humidistat. This equipment is fitted with a versatile micro processor based controller of programmable ( 99 programs and each program with 20 steps ) Temp. and Humidity controlled with soak and ramp setting on time based intervals with different steps, and day / night conditions by illumination control.. This controller have the facility of RS. 232 computer interface to save and take print out of temp. and humidity in regular intervals. A source cord is provided to connect to the PC / printer, to store / take print out of the temp: and humidity in setted intervals.
Category No. Capacity No. of Rack
RPGC-01 300 ltr 4
RPGC-02 600 ltr 8
Optional Accessories
UV light 60cms 20 watt / 45 cms 15 watts.
Suitable voltage stabilizer is to be used to protect the equipment from voltage fluctuation. Non use of stabilizer will render the warranty of the equipment invalid. Stabilizer rating 3 K.V.A for 300 Lit and 4 K.V.A for 600 Lit.
Humidity is created by steam generator fitted at the bottom of the unit, provided with water level cut –off and audio visual alarm.
Outer body with stainless steel 304 quality sheet with GMP standard also available.
 
  Seed Germinator

This is a versatile unit for conducting various experiments, tests on a variety of seeds under different conditions of temperature and humidity. Atmospheric – climatic - conditions are created within the chamber to perform different experiments without going on to the field.
Double walled construction, outer body made of G.I. sheet, inner chamber made with 304 quality stainless steel sheet. Temperature range 100C to 500C. Accuracy ± 10C. Humidity range 50% to 95% RH, accuracy ± 3%. Temperature and humidity controlled by digital display temp: controller and Humidistat. This equipment is fitted with a versatile Micro processor based controller of programmable ( 99 programs and each program with 20 steps ) Temp. and Humidity controlled with soak and ramp setting on time based intervals with different steps, and day / night conditions by illumination control. This controller have the facility of RS. 232 computer interface to take print out of temp. and humidity in regular intervals. A source cord is provided to connect to the PC / printer, to store / take print out of the temp: and humidity in setted intervals.
Suitable voltage stabilizer is to be used to protect the equipment from voltage fluctuation. Non use of stabilizer will render the warranty of the equipment invalid. Stabilizer rating:- 3 K.V.A. for 175 Lit, 4 K.V.A for 300 Lit.
Humidity is created by steam generator fitted at the bottom of the unit, provided with water level cut –off and audio visual alarm. Splash plate type motorized humidifier system can be incorporated instead of the steam injection. Outer body with stainless steel 304 quality sheet with GMP standard also available.
UV light 60 cm 20 watt / 45 cms 15 watt. Seed germinator with customer specifications and size can be supplied on request. please contact us with details and specifications.
Category No. Capacity No. of Racks
RSG-01 175 ltr 4
RSG - 02 300 ltr 6

 
  Environmental Controller (De-Humidifier)


This is a water condensing type refrigerated unit is suitable for de-humidification of packaging cabin/rooms of food and chemical industry. The room or cabin should be well closed and occupants should be minimum, the achievable humidity approx 40%. To get very low humidity the room should have an independent window air conditioner, the capacity of the air conditioner is to match with the heat load expelled by the de humidifier.
Suitable voltage stabilizer is to be used to protect the equipment from voltage fluctuation. Non use of stabilizer will render the warranty of the equipment invalid. Stabilizer rating:- 1K.V.A / 2 K.V.A.
Category No. Work space volume No. of Occupants
RDH-01 1000 cft room Volume 5
RDH-02 1500 cft room Volume 7


 
  Infrared Sterlizer

Sterlizes inoculating loops, needles and culture tube mouths safely and conveniently, preventing infectious splatter and cross contamination. flameless electric operation safe gaurds personnel and is ideal for an aerobic chamber provided with on off switch, pilot light and energy regulator. Suitable to work on 220 V AC supply
 
Category No. RIRS - 01 200 Watts




 
  Tissue Culture Rack
Made with M.S.tubular or aluminum pipe, duly powder coated. Having rack size of 120 cms length and 53 cms width, toped with thick plexi (polycar- bonate)glass, sides also paneled with poly carbonate sheet. Height between each rack is 38 cms. Each rack is fitted with two fluo: tube and one U.V. germicidal tube, provided with separete switches. Electronic chokes are fitted in a seperate box to avoid heat generation to the culture room (by keeping the choke box out side the room). The choke box is provided with cooling fan and castor wheel on request or wall mounting.

Category No. No. of Racks Material of construction
RTCR-01 4 MS Pipe & MS Frame
RTCR-02 4 Aluminum pipe & Alu. Frame
RTCR-03 5 MS Pipe & MS Frame
RTCR-04 5 Aluminum pipe & Aluminium Frame
Low cost tissue clture rack made with MS angle powder coated also available.
 
  Hot Plate (Round)

Aluminum / Cast iron hot plate , available with different dia and different rating mounted on powder coated mild steel sheet fabricated body, available with energy regulator and without energy regulator. Maximum surface temp: 4000C.

Category No. Hot plate dia in cms Rating
RHP-1 20 1.5 KW
RHP-2 25 1.5 KW
Optional:- Thermostat 50 0c to 300 0c (imported) can be provided.
 

  Rectangular Hot Plate

Mild steel powder coated body, hot plate top is fabricated with thick gauge stain less steel sheet. Temperature is controlled by an energy regulator. Available in different sizes and different rating.
Maximum surface temp: 400 0C.
Category No. Size of Hot Plate Ratings
RHPR-1 25X30 cms 1.2 KW
RHPR-2 25X40 cms 1.6 KW
RHPR-3 30X45 cms 2.0 KW
Optional:- Thermostat 50 0c to 300 0c (imported) can be provided.
 
  Dry block digester
  This dry block digester is suitable for digestion, boiling, and various industrial applications, heating block is made with cast aluminum alloy, suitable to work up to 4000C. Block Provided with 24 nos holes with 28mm dia and 120 mm depth suitable to insert 25mm dia 200 mm long digestion tube. Heaters are placed in the base of the block. Block mounted on heavy M.S. sheet frame, properly painted. Model available with thermostat up to 3000C and digital temp controller model for 4000 C .
Category No. Temperature Range
RDBD-01 50 °C to 300°C (Hydraulic thermostat).
RDBD-02 50 °C to 400°C ( Digital display temparature indicator cum controller).

 
  U V Inspection Cabinet


Cabinet made of mild sheet, duly powder coated, provided with inspection hole, useful for viewing TLC plate under UV light of different wave lengths, equipped with one fluorescent tube for inspection, provided with individual switch for each tubes

Category No. Description
RUVIC-01 Cabinet with one UV light long wave and one flou: lamp.
RUVIC-02
Cabinet with dual UV light short wave 254nm and long wave 365 nm and one flou: lamp.

 
  Plant sample Grinder

Heavy duty construction. Base with sturdy M.S. plate, properly painted, grinding jar made of stainless steel, grinding blades made with high carbon steel. Driven by 1 HP AC TEFC motor single phase. Coupled with V-belt, suitable to grind wood, roots, leaf, nuts, seeds of plant etc

Category No. Capacity
RPSG-1 1.5 ltr

 
  Laboratory Grinder (willy mill type)


Heavy duty construction. Pulverizer model grinder, housing with 75 mm dia and 45 mm depth, adjustable blade from side. The housing is equipped with a hopper at the top and collection chamber down with interchangeable mesh. Driven by 1 HP motor. Suitable to work on 230 V AC supply.

Category No. Grinder size
RGP-01 75x45mm

 
  Home | About Us | Products | Services |  Support | News | Contact Us    

© 2006 Rotek instruments