Roller Pot Mill
  Sturdy construction with Rubber lined rollers, driven by AC geared motor to obtain 70 RPM. Load capacity 25 kg. Unit supplied without pot and grinding balls. Suitable to work on 230 V AC supply.

Category No Watts RPM
RRPM-01 200 70
S.S.pots and ceramic grinding balls can be Supplied.
 
  Vicat Sofetening Apparatus with Oil Bath

Provided with a load carrying plate in a rigid metal frame, the tip can move freely in vertical direction. The indenting tip made with S.S. 3mm long 1 mm= 0.015mē. Supplied with micro meter dial guage graduated in division of 0.01 mm. The total thrust applied to the test specimen can be made up to 49.05 N (5.000 gf) and 49.5 N (5.050gf) (load of 5 kg)
Heating bath (oil bath) with efficient stirring mechanism with AC TEFC motor. A glass inspection hole in the one side and other side provided with light arrangements to see the test specimen. Temperature controlled by digital display temp.controller.
Category No Bath size
RVS -1 20x25x25 cm

 
  Oil Bath Round

Double walled construction, inner made of thick guage stainless steel, outer body made of C.R sheet properly powder coated, glass wool insulation, temp: controlled by thermostat / digital temp: controller, temp: range up to 2500C. S.S sheathed ISI quality elements are used for heating, suitable to work on 220 VAC. Available in following sizes.
Category No Internal Dimension (dia) Flask Capacity watts
ROBC-01 20 2 ltr 1500
ROBC-02 25 5 ltr 1500
ROBC-03 30 10 ltr 2000
Digital temp: controller fitted model also available.
 
  Oil Bath Rectangular

  Double walled construction, inner made of thick guage stainless steel, outer body made of C.R sheet properly powder coated, glass wool insulation, temp: controlled by thermostat / digital temp: controller, temp: range up to 2500C. S.S sheathed ISI quality elements are used for heating, suitable to work on 220 V AC. Available in following sizes.
Category No. Internal Dimension in cm Capacity watts
ROBR-01 20x20x17 2 ltr 1500
ROBR-02 25x25x17 5 ltr 1500
ROBR-03 30x30x17 10 ltr 2000
Digital temperature controller fitted model also available.
Geared AC TEFC motor with stainless steel stirring shaft can be supplied.

 
  Vortex Mixer (Cyclo Mixer)


This vortex mixer is vigorous agitating equipment used for thorough mixing of precipitates in test tubes, small bottles or flasks. The motor driven neoprene cup mounted eccentrically on the shaft vibrates rapidly. The mixing action is controlled by varying the angle and pressure appllied . Provided switch to select direct working or on touch working. A speed regulator switch also provided to control the speed. Suitable to work on 220 VAC.
Category No. Motor
RVM-01 15 Watts


 
  Tablet Friability Test Apparatus

 
This equipment is designed to determine the durability of tablets, fitted with 30 minutes timer. The revolving transparent acrylic drum having 30cms dia, provided with curved blade to carry the tablet to the top and let it down from the height. The rotation of the drum is predetermined to get 30 RPM.. Equipped with geared motor, suitable to work on 220 V AC supply.
Category No. Description
RFT - 01 Unit with one drum
RFT - 02 Unit with two drums

 
  Photo Therapy Unit

Photo Therapy unit is designed for the treatment to lower the serum bilrubin level in the neo-natal babies. Provided with cradle made of transparent acrylic sheet. Light object consist of 4 / 6 tubes of 20 watts. In the top object, two fluorescent tubes and two imported U V tubes, and the bottom object carries four fluorescent tubes and two imported U V tubes. Cooling fan is provided in the light object to maintain consistent wavelength of the light and an hour meter is also fitted with this unit. Height of the light object is adjustable, the entire unit is mounted on rigid castor wheels.

Models also available with Top Light Object.

Category No. Type Light Objects
RPU- 01   Top light object only 4 Fl & 2 U V 
RPU- 02  Top and bottom with transparent acrylic cradle. 2 Fl & 2 U V (top) 4 Fl & 2 U V


 
  Water Still ( manesty type) Wall mounting

Fully made of stainless steel, electrically operated to obtain distilled water. Models also available with detachable condenser tube for easy condenser tube cleaning. Suitable to work on 220 / 440 V AC supply.

Category No. Approx. Capacity/Hr Watts
RWS-2 2 ltr. 1500
RWS-4 4 ltr. 3000
RWS-6 6 ltr. 4000
RWS-8 8 ltr. 6000
RWS-10 10 ltr. 8000
Automatic water level cut off system can be supplied.
 

  Water Still (Barnstead type- Tabletop model)

 
Table top model water still, fully made of stainless steel, electrically operated to obtain distilled water , double walled construction inner and outer made of stainless steel, provided with ceramic wool insulation to reduce heat loss, and more effective distillation.
Category No. Approx: Capacity / hr. Watts
RWS T-2 2 ltr 1500
RWS T-4 4 ltr. 3000
RWS T-6 6 ltr. 4000
RWS T-8 8 ltr. 6000
RWS T-10 10 ltr. 8000
Automatic water level cut off system can be supplied.
 
  Depth Sampler
Designed to collect water samples from desired depth, suitable to collect water from pond, lake, and sea etc, easy to operate. The sample collection container is made of transparent Acrylic tube, Provided with drain cock in the bottom, provided with shutter opening and lid locking arrangement, one messenger is made of M.S. and galvanized is supplied, after lowering the depth sampler to the desired depth, the messenger can be send down through the  rope, that will hit on the lock and release the lock simultaneously both the shutters will close and the water in that depth will be stored in the container. Supplied with 15 mtr rope.

Category No. .Weight (approx.) Capacity
RDS-1 3 kgs 2 ltr

 
  Lab Jack


Screw type with worm gear, housing is made of aluminum cast alloy, displacement maximum 85 mm, to carry up to 25 kgs.

Category No. RLJ-01


 
  X-Ray Filim Drier

The body of the unit is made with mild steel duly powder coated.This is an equipment for easy and fast drying of X-ray film especially in the monsoon season, equipped with thermostatically controlled heaters and fan for forced air circulation, provided with 16/24 hanger slots.
Category No. Specifications No. of Hanger slot
RXD-1 Single Walled 16 nos.
RXD-2 Double walled 16 nos.
RXD-3 Single walled 24 nos.
RXD-4 Double walled 24 nos.

 
  Home | About Us | Products | Services |  Support | News | Contact Us    

© 2006 Rotek instruments