Water baths
  Paraffinic Bath

Fully made of stainless steel, outer body made of satin finished S.S sheet, inner body made of 304 quality S.S sheet.Suitable to heat up paraffin wax for heat therapy. Volume of the bath is 20 ltr. Heating elements are securely embedded on the outer surface of the bath vessel. Temp: controlled by digital display, temp: controller with indicator, provided with lid and drain cock for the bath.
Combined unit of paraffin and waterbath also available, used for warming of warm carriers, heater packs etc. Waterbath volume 20 Ltr. and paraffin bath volume 20 Ltr. Provided with individual digital temp:controller cum indicator and drain cock for the baths. The unit is fitted on a trolley with castors with breaks.
Category No. Internal Dimensions Capacity Watts
RPB -01 30 x 30 x 25 cms 20 lit 1200
RPB -02 30 x 30 x 25 cms x2 20 + 20 lit 2400
 

  Plasma thawing bath

Two models are available; the Cryoprecipitate thawing is with cooling arrangement to work from 4C and heating arrangement up to 37C.
Designed to set at any temp: between 4C and 37C.
Other model is to work at 37C, thermo thawing for uniform thawing of frozen plasma before transfusion.
Double walled construction, other body made of galvanized sheet, duly powder coated, insulated with PUF, inner chamber made of 304 S.S sheet, inner vessel with rounded corners for better water circulation and maintain precise temp: uniformity in the bath. Water circulation obtained by a forceful pump. Temp: controlled MCD (Microprocessor controlled digital display) temp: controller with audio visual alarm for low and high temp: fluctuation. Accuracy 0.5C. Removable S.S tray with acrylic sheet separators to accommodate 12 plasma bags. Suitable to work on 220 VAC supply.
Category No. Capacity Specification Internal Dimension in cm Temperature Range
RPTB-01 40 ltr Cryo thawing 45x30x25 4C to 37C
RPTB-02 40 ltr Thermo thawing 45x30x25 37C
Refrigeration is obtained by hermetically sealed compressor with CFC free refrigerant.

 
  Viscosity water bath

Double walled construction outer body made of CR sheet, duly powder coated, inner chamber made of 304 quality stainless steel sheet, insulated with good quality glass wool to reduce thermal loss, temp: controlled by digital display temp controller cum indicator (proportionate). To get the uniform temp in the water bath an AC single speed stirrer is fitted for forced circulation and assure highest uniformity of temp: in the bath, and toughened glass window is provided in the front and back.
Category No. Internal Dimension in cm watts
RVW-01 35x30x17.5 2000

 
  Precision water bath

Precision water bath (constant temperature water bath)
Digitial temp: controller and stirrer.
This high precision water bath also called constant temp: water bath gives temperature accuracy of 0.2C. Double walled construction outer body made of CR sheet, duly powder coated, inner chamber made of 304 quality stainless steel sheet, insulated with good quality glass wool to reduce thermal loss, Temp: controlled by a digital display temp controller cum indicator (proportionate). To get the uniform temp in the water bath an AC single speed stirrer is fitted and a toughened glass window is provided in the front.
Category No. Internal Dimension in cm watts
RPW-01 35x30x17.5 1000
RPW-02 40x30x20 1000
RPW-03 45x30x25 1500
 

  Circulation Water Bath

  Thermostatically controlled water bath. Temperature. range ambient to 900C, accuracy ± 10C. Double walled construction, outer body made of C.R. sheet, inner chamber made of stainless steel. The water is circulated by an F.H.P. pump to the external source, where the water is required. Digital display proportional Temperature controller fitted model also available. This model ensure Temperature. accuracy of ± .2°C. .

 
  Cylindrical Water Bath

 
Stainless steel,. single walled cylindrical construction, ideal to evaporate the liquid like alcohol or for melting solids such as agar, provided with concentric rings on hole dia of 75 mm.
 
  More
  Insipisator

This is an ideal equipment for preparing the media, inner chamber made of copper sheet of high thermal conductivity. The double walled water jacket is made of copper sheet, housed in a wooden box, insulated with glass wool, the inner surface and tube holders  are black epoxy coated for even radiation and distribution of temp: in the chamber. Provided an acrylic framed top and woolen blanket between the chamber and the wooden top. Provision for water inlet and outlet, the outlet is the over flow tube. Both the inlet and over is provided at the bottom.
The heater flow nipple are kept at same level so either one can be used as inlet or outlet, a drain valve is provided at the out side bottom of the jacket, temperature is controlled by imported thermostat. Suitable to work on 220 V AC supply.
The chamber can accommodate 100 tube of media at time.

Category No. Heater
RIN-1 500 watts

 
  Paraffin Embedding Bath

Double walled construction, outer body made of C.R sheet properly powder coated and inner chamber made of S.S.304 quality sheet. Glass wool insulation to reduce heat loss, temparature controlled by Thermostat, 6 pots to accommodate 65 mm dia stainless steel / chromium plated copper cups with handle and provided 2 holes of 30 mm dia to insert tubes. Suitable to work on 220 V AC supply.
Category No. Type Dimensions
RPEB-01 Stainless Steel pots 375x300x150mm
RPEB-02 Copper pots 375x300x150mm

 

   Water Bath Rectangular-Thermostatic-(Ring type)

Ideal to evaporate the liquid like alcohol or for melting solids such as .to accommodate containers of various size removable type concentric rings are provided on hole dia of 75 mm.
Double walled construction, outer made of M.S. powder coated. Inner body made of S.S. 304 quality sheet, glass wool insulation, fitted with 30C to 110C imported Thermostat. Suitable to work on 220 VAC supply.
Category No. Bath SizeL
W H in cm
Watts No. of Holes
RRW-6 35x25x12.5 1500 6
RRW-9 35x35x12.5 1500 9
RRW-12 35.5x40.5x10 2000 12
RRW-24 60x40.5x10 2000 24
Digital display temp: controller (proportionate) can be fitted.
Outer body with stainless steel 304 quality sheet also available.
 
  Serological Water Bath-Thermostatic


Ideal for routine clinical procedure, incubation, inactivation, agglutination as well as most serological, pharmaceutical and biomedical procedure.
Double walled construction outer body made of M.S sheet, powder coated, inner body made of 304quality S.S sheet. Glass wool insulation, fitted with 30C to 110C Imported Thermostat. . Accuracy: 1C. Provided with (ISI quality) immersion type heating element, coverd with perforated removable diffuser tray,Two types of lids are available. Suitable to work on 220 V A C Supply.
Category No. Bath Size L W H in cm Watts Capacity
RSW-01 25x17.5x15 750 7 ltr
RSW-02 35x25x12.5 1000 11 ltr.
RSW-03 30x25x17.5 1500 14 ltr.
RSW-04 33x30x17.5 (Suitable for 4 racks) 2000 18 ltr.
RSW-05 45.5x30x17.5 (Suitable for 6 racks) 2000 25 ltr.
RSW-06 60.5x30x17.5 (Suitable for 8 racks) 2000 33 ltr.
RSW-07 45.5x35x 27.5 3000 45 ltr.
Supplied without thermometer and rack.
Digital display temp: controller (proportionate) can be fitted.
1/20 H.P. motor stirrer with electronic speed regulator can be fitted.
Outer body with stainless steel 304 quality sheet also available .
 
  Single Wall Water Bath

Stainless steel single walled rectangular construction, ideal for evaporating the liquid like alcohol or for melting solids such as agar, provided with concentric rings on hole dia of 75 mm. I.S.I quality immersion type heater of kettle type provided with connector and plug, without thermostat, suitable to work on 220 VAC. Available in three different sizes.

Category No. Bath Size Watts No. of Holes
RWB-01 30x25x10 1500 6
RWB-02 30x30x10 1500 9
RWB-03 40x30x10 2000 12

 
  Tissue Floatation Bath

This unit is very useful to prepare wrinkle free tissue specimens. Double walled construction and glass wool insulation. The inner vessel is made of good quality aluminum single piece without any joint, properly powder coated with black colour, outer body also made of aluminum finished with grey colour powder coating , temp: range up to 90C, fitted with Hydraulic Thermostat (Imported). Suitable to work on 220 V AC supply.

Category No. Dia x Depth Description
RTB-02 200x90mm Thermostatic

 
  Home | About Us | Products | Services |  Support | News | Contact Us    

© 2006 Rotek instruments