Incubators
  Hybridization incubator
  Double walled construction, outer body made of mild steel, duly powder coated. Inner chamber made of 304 quality stainless steel sheet, glass wool insulation, Temp: range ambient +50C to 600C, Temp: Controlled by MCD (micro processor controlled digital display) Temp: Controller.
The inbuilt rotator provided S.S. tray with suitable supporters to hold rack or flasks on it. The up and down oscillation can be controlled by an electronic speed regulator, maximum 30 stroke per minute. An air circulation fan is provided in the chamber, one CFL light also provided in the chamber. To create humidity a water bowl can be kept in the centre of the chamber. Front door of the equipment is provided with glass window.
Category No. Internal dimensions
RHI-01 35 x 40 x 35 cm 400 watts

 
 
   Platelet incubator

  These platelet incubators are designed for close control environment for stowed platelets. Double walled construction, outer body made of G.I sheet, duly powder coated, inner chamber made of stainless steel 304 quality sheet, temp: range 50C to 600C. Temp : controlled by digital display temp: indicator cum controller with built in on delay, accuracy+/- 0.50C, provided with plexiglass door inside. Suitable to work on 220 V AC supply.
Equipped with CFC free compressor and refrigerant .
Suitable to place the Platelet Agitator / Platelet Rotator.
Outer body made of stainless steel 304 quality sheet with GMP standard also available.
Suitable voltage stabilizer is to be used to protect the equipment from voltage fluctuation. Non use of stabilizer will render the warranty of the equipment invalid.
Stabilizer rating:- 2 K.V.A.
Category No. Capacity
RPI-01 110 litre

 
 
   Bacteriological Incubator-Bottom Heated

  The perfect choice for reliable day to day operation in various uses such as drying and staining of slides, paraffin embedding, tissue culture work, incubation of anti-body tests and microbiological determination etc.
Outer body made of M.S sheet, powder coated and Inner chamber choice of aluminum or stainless steel. Temp: Controlled by: Imported Hydraulic Thermostat / Digital display proportionate temp: controller, insulation: Glass wool 63 mm reduces the heat loss.
Temp: range ambient + 5°C to 110°C. Accuracy: ± 1°C. Provided with Inner plexi glass door. Supplied without thermometer.
“Outer body with stainless steel 304 quality sheet can be fabricated ”
Various models are available details and specifications are given below.
Incubator with thermostat (EGO German make)

Category No. Internal Dimensions No. of Shelves Approx.ltr.
Capacity
Watts
L W H in cm
RI-12 30X30X30 2 28 300
RI-14 35X35X35 2 45 300
RI-18 45X45X45 2 95 300
RI-18H 45X45X60 3 125 300
RI-24 60X60X60 3 225 400
RI-24SH 60X45X91 3 250 400
RI-24H 60X60X91 3 325 400
Incubator with air circulation fan (bottom heated) AC TEFC motor coupled with centrifugal-stainless steel impeller and a chamber provided for air circulation.
Incubator (bottom heated) with digital display temperature controller cum indicator (Proportionate type).
Deluxe model incubator (bottom heated) with digital display temperature controller cum indicator (proportionate type) and air circulation fan.

 
 
  Incubator-Memmert type

Incubator-Memmert Type(With 3 side heating element) with thermostat (EGO German make)
Category No. Internal Dimensions No. of Shelves Approx. Ltr
Capacity
Watts
L D H in cm
RIM-12 30X30X30 2 28 300
RIM-14 35X35X35 2 45 300
RIM-18 45X45X45 2 95 300
RIM-18H; 45X45X60 3 125 300
RIM-24 60X60X60 3 225 400
RIM-24SH 60X45X91 3 250 400
RIM-24H 60X60X91 3 325 400
Incubator – memmert type with air circulation fan (AC.TEFC motor, coupled with centrifugal-stainless steel impeller and a chamber provided for air circulation.
Incubator – memmert type with digital temperature controller cum indicator (Propotionate type).
Deluxe model memmert type incubator with digital temp: Controller cum indicator (Propotionate type) and air circulation fan.
 
  B O D Incubator (cooling Incubator)

Most versatile cabinet for Biochemical Oxygen Demand determinations. Caster wheel mounted cabinet is double walled, outer body made of GI sheet, properly powder coated and inside chamber made with choice of Aluminum or Stainless steel sheet. The gap between the inner and outer wall is filled with thermal glass wool insulation. Triple walled back side of the unit is provided with an air circulation fan, the air circulation system consists of a TEFC branded motor with long shaft and ball bearings coupled with dynamically balanced impeller type blower to get power full air circulation in the chamber and ensures even temp: in the cabinet. Provided full view perspex door inside, which makes it possible to inspect the specimens without disturbing the cabin temperature. Supplied with shelves and adjustable shelf position. Equipped with C.F.C free compressor and refrigerant. Temp : Range 50C to 600C, controlled by digital display temp: indicator cum controller with built in on delay, Accuracy +/ - 0.50C,

Suitable to work in 220 V AC supply

Product Code Capacity Temperature Range
RCI – 3 A 85 litre 5° C to 60o C ( Chamber Aluminium)
RCI - 6 A 170 litre 5° C to 60o C ( Chamber Aluminium)
RCI - 10 A 280 litre 5° C to 60o C ( Chamber Aluminium)
RCI - 12 A 340 litre 5° C to 60o C ( Chamber Aluminium)
RCI -3 S 85 litre 5° C to 60o C ( Chamber Stainless Steel)
RCI -6 S 170 litre 5° C to 60o C ( Chamber Stainless Steel)
RCI – 10 S 280 litre 5° C to 60o C ( Chamber Stainless Steel)
RCI – 12 S 340 litre 5° C to 60o C ( Chamber Stainless Steel)

1. Outer body made of stainless steel 304 quality sheet with GMP standard also available.
2. Suitable voltage stabilizer is to be used to protect the equipment from voltage fluctuation.
3. Non use of stabilizer will render the warranty of the equipment invalid.
4. Stabilizer rating:- 1 K.V.A for 85 and 170 Ltr. 2 K.V.A for 280 and 340 Ltr.

 
  Incubator Shaker (Orbital Shaking Incubators)
 

Rotek Shaking incubators are ideal where orbital shaking is necessary under closely controlled temperature (both below and above ambient temperature). Suitable for laboratory procedures such as tissue culture, fermentation studies, growth studies, enzyme reactions, controlled purification and ageing tests.

Double walled construction, exterior is made of C.R., interior made of Stainless Steel. Fro inspecting the inside specimens without disturbing the temperature, a plexi glass door is provided. Available in two models, one with cooling and heating arrangement and the other without cooling. Temperature controlled by digital display temperature controller.





 
Category No. Shaking Capacity Temp. Range Temp. Accuracy Shaking Speed
ROSI - 01 16 flasks x 500ml 5°C above ambient - 60°C ±0.5 50 - 250 rpm with digital speed meter
ROSI - 02 16 flasks x 500ml 5°C - 60°C ±0.5 50 - 250 rpm with digital speed meter
  Incubator Shaker (Cooling)

These shaking incubators are ideal for shaking under closely controlled temperature both above or below the ambient temperature. Suitable for laboratory procedures such as tissue culture, fermentation studies, growth studies, enzyme reactions, controlled purification and ageing tests.
This is a BOD incubator having 6 cft. capacity. Equipped with orbital shaking mechanism to shake contents in erlenmeyer flask required temperature. Temp: range 100C to 600C. Accuracy +/- 0.50C. Temp: controlled by digital display temp: controller cum indicator with built in ON delay. The speed of shaking is controllable from 50 to 250 RPM and equipped with a digital timer and RPM indicator. Provided full view perspex door inside. The shaking platform is made with thick SS sheet and provided place to fix different size clamps to hold the flasks of different capacity. Equipped with CFC free compressor and refrigerant.





 
Suitable voltage stabilizer is to be used to protect the equipment from voltage fluctuation.
Non use of stabilizer will render the warranty of the equipment invalid.
Stabilizer rating:- 2 K.V.A. 
 
Category No. Capacity Platform Size No of Flask
ROSI-1 170 ltr 45 x 45 cm 16 flasks - 250ml
 
   
  Optional Accessories
Outer body with stainless steel 304 quality sheet with GMP standard also available.
Interior illumination with fluorescent tube 2 nos.
1 No U.V tube -45cms 15 watts.
Additional Lotus clamps.
Automatic digital cyclic timer 0-24 hrs for illumination control.

 
  Incubator Shaker (Heating)
 

   
 

Rotek shaking incubators are ideal where orbital shaking is necessary under closely controlled temperature above ambient temperature. Suitable for laboratory procedures such as tissue culture, fermentation studies, growth studies, enzyme reactions, controlled purification and ageing studies.

   
 

This is an incubator having 6 cft. capacity, double walled construction; exterior is made of C.R. sheet and interior of stainless steel sheet. Equipped with orbital shaking mechanism to shake contents in Erlenmayer flasks in required temperature. The temp: range ambient + 50C to 600C ,Temp: controlled by digital display temp: controller cum indicator. Accuracy +/ - 0.50C. Speed of shaking is 50 to 250 RPM. The speed of the shaking is controllable and equipped with digital timer and RPM indicator. The shaking platform is made with thick S.S. sheet and provided place to fix different size clamps to hold the flasks of different capacity. 

   
 

Category No. Capacity Platform Size No of Flask
ROSI-2 170 ltr 45 x 45 cm 16 flasks - 250ml
 

   
  Suitable to work on 220 V AC supply      
  Optional Accessories
Outer body with stainless steel 304 quality sheet with GMP standard also available.
Interior illumination with fluorescent tube 2 nos.
Automatic digital cyclic timer 0-24 hrs for illumination control.
U.V. tube 45 cms 15 watts.
Additional Lotus clamps.

   
  Home | About Us | Products | Services |  Support | News | Contact Us    

© 2006 Rotek instruments